Lead Free Solder Bar Electroloy LF-801

Lead free solder bar LF-801 was developed to offer a technically superior and more economical option to other lead-free alloys. 

Product Name & Code: SOLDER BAR

– LEAD FREE ALLOY – Sn99.3 / Cu0.7 + Ni + P LF- 801

– LEAD FREE ALLOY – Sn99.3 / Cu0.7 + Ni + P LF- 801HD

– LEAD FREE ALLOY – Sn99.6 / Cu0.4 + Ni + P LF- 801BE (TOP UP ALLOY)

SPECIFICATIONS LEAD FREE SOLDER BAR LF-801

The composition of solder bar Electroloy’s LF-801B/ LF-801HD & LF-801BE lead-free bar is strictly controlled to the following specifications: – 

CHARACTERISTICS OF LEAD FREE SOLDER BAR LF-801

Dip Soldering: Lead free solder bar LF-801 bars are also suitable to be used in high-temperature dip thinning of fine copper wire in component Manufacturing. 

The patented addition of nickel to the tin-copper eutectic offers the following advantages:

o Low-cost lead-free alloy 

o Low dross formation 

o Bright, smooth solder joints that are free from gross micro cracks. 

o Good through-hole penetration. 

o Low rate of copper leaching 

o Less aggressive on stainless steel & other solder pot materials 

o Close to the eutectic temperature 

o Easy to maintain alloy composition

Packing:

– Lead free solder bar Electroloy’s LF-801B/ LF801HD lead-free bars come in triangle cast & extruded types. The LF-801B/ LF-801HD exhibit a shiny appearance & uniform silver-grey color. 

– The brand & alloy code is embossed onto the surface of each bar. Each bar is approximately 700 – 900 grams in weight. 

– The physical dimension is 330mm x equal side of 24mm. 

– The LF-801B/ LF801HD lead-free bars are packed into “Green “carton boxes of 20kg each. 

– Each box contains the following traceable information:  1. The Supplier; 2. Grade; 3. Product Code / Type; 4. Lot Number; 5. Weight per Box.

APPLICATION LEAD FREE SOLDER BAR LF-801

– LF-801 lead-free solder bar has proven to perform well in automated wave soldering, selective soldering, and static solder pots. 

– In the LF-801 solder bath, copper tends to dissolve into the solder from the boards and component leads. If the copper content of the solder bath exceeds 0.85%, it is likely to cause an increase in the incidence of bridges, icicles, and other defects. 

– In order to maintain the copper level within the permissible limit in the solder bath, Electroloy recommends the LF-801BE top-up alloy. The LF-801BE has a lower copper content than the LF-801 to ensure that the copper content in the solder pot stays below the critical level of 0.85%. 

– Verification of copper content is easy with the free Solder Pot Analysis offered by Electroloy. The statistical analysis of your LF-801 solder pot will help you monitor the copper level over time & make critical decisions to achieve good production yield with our LF-801 solder bars.

SHOULD BUY THE LF801 SOLDER BAR AT THE TECH?

Established in 2014, THE TECH specializes in distributing materials, chemicals, and components for electronic manufacturing and assembly. The products distributed by THE TECH always ensure high quality, and safety, and always comply with European safety regulations (RoHS), environmental regulatory standards, and other standards.

– THE TECH brings the best service to customers, from consultation to delivery. Optimizing shipping costs at the lowest or free shipping. 

– Lead-free solder bar LF801 is always available at the warehouse to quickly respond to customers’ requests in large quantities.

– Regarding the price, THE TECH always has a suitable and very competitive price list for the SB-LF801 solder bar on the market, which customers can refer to.

To get lead-free solder bar LF801 and the best products, materials, and components for production, come to THE TECH. Genuine products and reasonable prices bring the best economic value to customers.

TH-ELECTRONIC TECHNOLOGY CO

Ad: 82 Street 13, Phuoc Binh Ward, Thu Duc City, Ho Chi Minh City

Tel: (+84.28).3728.1992

Fax: (+84.28).37281992

info@thetech.com.vn

www.thetech.com.vn

Skype & Whatsapp: (84)867 600900